Phoenix-Showcontroller Live 4
- Stefano
- Autor
Weniger
Mehr
- Beiträge: 2
5 Monate 2 Wochen her #499
von Stefano
Stefano antwortete auf Phoenix-Showcontroller Live 4
Thanks for your reply, so do I have to buy only the License with dongle (https://www.thomann.de/it/laserworld_showcontroller.htm) and my Micro USB interface works, or do I have to buy the Shownet too (https://www.thomann.de/it/laserworld_shownet_showeditor_software.htm) ?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Super User
Weniger
Mehr
- Beiträge: 69
5 Monate 2 Wochen her - 5 Monate 2 Wochen her #498
von Super User
Super User antwortete auf Phoenix-Showcontroller Live 4
Hey Stefano,
The Phoenix 4 laser software is a different software than Showcontroller. They both have similar control logics, but are completely separate products. Whereas Phoenix was discontinued many years back, Showcontroller is actively developed, receives frequent feature updates and is well supported. Due to some compatibilities on the hardware side, it is possible that Showcontroller can detect various hardware interfaces, but it requires a Showcontroller Plus license to output to these.
Details here:
Anyway, you would need a Showcontroller license to run Showcontroller software with the option to output to hardware - Phoenix license dongles are not supported.
The Phoenix 4 laser software is a different software than Showcontroller. They both have similar control logics, but are completely separate products. Whereas Phoenix was discontinued many years back, Showcontroller is actively developed, receives frequent feature updates and is well supported. Due to some compatibilities on the hardware side, it is possible that Showcontroller can detect various hardware interfaces, but it requires a Showcontroller Plus license to output to these.
Details here:
Anyway, you would need a Showcontroller license to run Showcontroller software with the option to output to hardware - Phoenix license dongles are not supported.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Stefano
- Autor
Weniger
Mehr
- Beiträge: 2
5 Monate 2 Wochen her - 5 Monate 2 Wochen her #497
von Stefano
Dieser Beitrag enthält einen Bildanhang.
Phoenix-Showcontroller Live 4 wurde erstellt von Stefano
I have the Phoenix-Showcontroller 4 Live with dongle + USB interface with ILDA. If I install Showcontroll the program with the dongle opens, but the laser works only in Hardware Check.
In Live the Laser it is not recognized for missing License. I ask for help to make it work. Thanks
In Live the Laser it is not recognized for missing License. I ask for help to make it work. Thanks
Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
